NRJE

Generated from C.65.00 /SYSADMIN/PUB/MYCICAT last modified on Sun Aug 29 15:08:37 2004

Back to Main Index

NRJE

     This command invokes the NRJE subsystem, providing batch
     communications across SNA networks.  (CM)

SYNTAX

     NRJE [wsid]

PARAMETERS

wsid                Identifies the particular workstation the user
                    wishes to access.  The workstation parameter is an
                    alphanumeric name beginning with a letter and
                    containing one to eight characters.  A workstation
                    parameter is associated with a host remote.

OPERATION

     The NRJE command invokes the NRJE subsystem, which supports
     batch communications across SNA networks.  After a
     user enters the NRJE command, the NRJE subsystem will print a
     banner line, initiate necessary error recovery, optionally
     print a welcome message, and prompt for a command.  The user
     can specify the workstation he or she wishes to access in the
     NRJE command, or select the workstation in subsequent
     subsystem commands.  The subsystem HELP command provides
     additional information about NRJE operation.

EXAMPLE(S)

     NRJE BAEDP

     After entering this command, the user will enter the
     NRJE subsystem.  Subsequent subsystem commands will access
     the workstation BAEDP, by default.
     NRJE

     After entering this command, the user will enter the
     NRJE subsystem.  The user must select a workstation in
     subsequent subsystem commands.

Back to Main Index